Inconel® is a registered trademark (of Special Metals Corporation) referring to a family of austenitic nickel-chromium super alloys.

Inconel is Non ferrous because it consists mostly of Nickel with only a small amount of Iron in its chemistry.

Steel Emporium is the leading suppliers, manufacturers and exporters of Alloy steel products in various forms.

ITEM BRAND SIZE
Inconel alloy Inconel 600
Inconel 601
Inconel 625
Inconel 718

Plate: 3.0~60.0mm (THK) *1000mm (WIDTH) *2000mm (LENGTH)

Bar: Round:Φ5.5~250mm;Square:40~240mm*40~240mm

Wire:Φ0.1mm~18mm

Strip:0.1~3.0mm(THK)*≤ 420mm (WIDTH)

Seamless pipe:6mm~219mm(OD)*0.5mm~18mm(WT)

Welded tube:1mm~120mm(OD)*0.1mm~10mm(WT)

U Shape pipe: 10mm~40mm (OD)*0.5-5mm (WT)

Flange: 3/8” ~48” (DN10 ~DN1200)

Tee: 1/2”~48”* SCH 5-SCH160/XXS(WT)

Monel alloy Monel 400
Monel K500
Nickel 52
Nickel alloy Nickel 200
Nickel 201
Invar alloy Invar 36
Kovar alloy Kovar 29
Incoloy 800
Incoloy 800H
Incoloy alloy Incoloy 800HT
Incoloy 825

Useful information about Inconel

Inconel Material Specification
  • Inconel 600
    Solid solution strengthened.
  • Inconel 601
  • Inconel 625
    Acid resistant, good weldability. The LCF version is typically used in bellows. Ideal for hardware and components in the power, aerospace and chemical processing industries. Offered in sheet, plate, bar and forgings.
  • Inconel 690
    Low cobalt content for nuclear applications, and low resistivity.
  • Inconel 713C
    Precipitation hardenable nickel-chromium base cast alloy.
  • Inconel 718
    Gamma double prime strengthened with good weldability. The preferred material for cryogenic storage tanks, turbines, downhole shafts and wellhead parts offered in sheet, plate and bar.
  • Inconel 751
    Increased aluminium content for improved rupture strength in the 1600 °F range.
  • Inconel 792
    Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines.
  • Inconel 939
    Gamma prime strengthened to increase weldability.
  • Inconel 188
    Readily fabricated for commercial gas turbine and aerospace applications. Offered in sheet, plate and bar.
  • Inconel X-750
    Commonly used for gas turbine components, including blades, seals and rotors.
  • Inconel 230
    Inconel 230 Plate & Sheet mainly used by the power, aerospace, chemical processing and industrial heating industries, Aerospace Materials.
  • Inconel 907
  • Inconel 909
  • Inconel 706
  • Inconel 617
Inconel stock
Inconel density and Properties

Inconel Tensile Strength

  Physical Properties Metric English
Inconel Alloy 600 Density 8.47 g/cc 0.306 lb/in³
Inconel Alloy 625 Density 8.44 g/cc 0.305 lb/in³
Inconel Alloy 718 Density 8.19 0.296 lb/in3 (8.192 g/cm3)

Inconel Alloy 625 Density*. 8440 [kg · m-3
Inconel Alloy 625 Density: 0.303 lb/in3 (8.44 g/cm3)

Electrical Conductivity of Inconel Alloy
Material Conductivity Resistivity Notes
(% IACS) (Siemens/m) (Ohm-m)  

Inconel 600

1.70

9.860E+05

1.014E-06

conductivity converted from resistivity

Inconel 600

1.67

1.030E-06

conductivity converted from resistivity

Inconel 601

1.45

1.190E-06

conductivity converted from resistivity

Inconel 617

1.41

1.220E-06

conductivity converted from resistivity

Inconel 625

1.34

1.290E-06

conductivity converted from resistivity

Inconel 690

11.65

1.480E-07

conductivity converted from resistivity

Inconel 718

1.38

1.250E-06

conductivity converted from resistivity

Inconel X750

1.41

1.220E-06

conductivity converted from resistivity

Inconel Hardness

Inconel Rockwell Hardness, Inconel Strength

Material Hardness HB
Inconel Alloy 625 Bar
≤ 287 HB
Inconel Alloy 625 Sheet
145-240
Inconel Alloy 625 Tube
Seamless and Welded
-
Inconel Alloy 600 rod and bar
65-85B
Inconel Alloy 600 Plate
65-85B
Inconel Alloy 600 Sheet
88B max
Inconel Alloy 600 Tube and Pipe
88B max
Inconel Alloy 600 Wire
-
Inconel Alloy 600 Wire
-
Inconel Alloy 600 Wire
-

Inconel Heat Treatment

Heat Treatment Inconel Alloy 600 Inconel Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.
Heat Treatment Inconel Alloy 625 Inconel Alloy 625 has three basic heat treatments:
(1) High Solution Anneal - 2000/2200°F (1093/1204°C), air quench or faster.
(2) Low Solution Anneal - 1700/1900°F (927/1038°C), air quench or faster.
(3) Stress Relieve - 1650°F (899°C), air quench.
Inconel Heat Shield Inconel (2200 deg F continuous).

Inconel Low Temperature

Inconel Alloy 718 temperature ranges from cryogenic up to 1400°F
Inconel Alloy 625 temperatures ranging from cryogenic to 2000°F

Inconel Melting Point

Inconel Alloy 718 Melting Range Solution Treated: 2500-2600°F
Solution Treated and Aged: 1370-1430°C
Inconel Alloy 600 Melting Range Metric: 1354 - 1413 °C
English: 2470 - 2580 °F
Inconel Alloy 625 Melting Range 2350 - 2460°F (1280 - 1350°C)

Inconel Thermal Conductivity

Inconel Thermal Properties, Inconel Thermal Expansion

Inconel Alloy 600 Thermal Conductivity

Metric: 14.9 W/m-K
English: 103 BTU-in/hr-ft²-°F

Inconel Alloy 625 Thermal Conductivity Metric: 9.8 W/m-K
English: 68 BTU-in/hr-ft²-°F

Inconel Temperature Limits

Inconel Alloy 600 Heat Capacity

Metric: 0.444 J/g-°C
English: 0.106 BTU/lb-°F

Inconel Alloy 625 Heat Capacity Metric: 0.41 J/g-°C
English: 0.098 BTU/lb-°F

Inconel Mechanical Properties

Typical Mechanical Properties

Inconel Machinability and Inconel Yield Strength

Material Form and Condition Tensile Strength Yield Strength Elongation % Hardness, Rockwell
ksi MPa ksi MPa
Inconel Alloy 600 rod and bar Cold drawn Annealed 80-100 550-690 25-50 170-345 55-35 65-85B
Inconel Alloy 600 Plate Hot rolled Annealed 80-100 550-725 30-50 205-345 55-35 65-85B
Inconel Alloy 600 Sheet Cold Rolled Annealed 80-100 550-690 30-45 205-310 55-35 88B max
Inconel Alloy 600 Tube and Pipe Cold Drawn Annealed 80-100 550-690 25-50 170-345 55-35 88B max
Inconel Alloy 600 Wire Cold Drawn Annealed 80-120 550-830 35-75 240-520 45-20 -
Inconel Alloy 600 Wire Cold Drawn No 1 Temper 105-135 725-930 70-105 480-725 35-15 -
Inconel Alloy 600 Wire Spring Temper 170-220 1170-1520 150-210 1035-1450 5-2 -
Inconel Alloy 625 Bar Annealed 120 827 60 414 30 ≤ 287 HB
Inconel Alloy 625 Sheet Annealed 120 827 60 414 30 145-240
Inconel Alloy 625 Tube
Seamless and Welded
Annealed 120 827 60 414 35 -

Inconel Ultrasonic Velocity

Inconel Ultrasonic Testing

Material in/sec m/sec
INCONEL 224400 5699.76

Delivery schedule for Inconel

Location Days Location Days
UAE 15 Saudi Arabia 15
Libya 40 Syria 40
Qatar 15 India 7
Turkey 30 Tanzania 30
Namibia 40 Italy 40
Uganda 40 Angola 40
Kazakhstan 20 Algeria 20
South Africa 40 Thailand 20
Indonesia 20 Australia 40
Bahrain 15 Kenya 40
Zambia 40 Egypt 40
Nigeria 40 Ethiopia 40
Vietnam 20 Albania 20
Inconel price in India
Inconel price Per Kg in Mumbai
Inconel Price per kg in India Price in USD
Inconel 600 Price per kg in India $ 33.98 Price/Per Kg
Inconel 601 Price per kg in India $ 35.30 Price/Per Kg
Inconel 625 Price per kg in India $ 41.18 Price/Per Kg
Inconel 718 Price per kg in India $ 49.38 Price/Per Kg
Inconel X750 Price per kg in India $ 78.00 Price/Per Kg
Incoloy 800 Price per kg in India $ 17.43 Price/Per Kg
Incoloy 800HT Price per kg in India $ 15.00 Price/Per Kg
Incoloy 825 Price per kg in India $ 18.15 Price/Per Kg
Incoloy 925 Price per kg in India $ 19.00 Price/Per Kg
Incoloy Alloy 330 Price per kg in India $ 16.00 Price/Per Kg